Laden...Even geduld aub...
Electronica, Quadro/Multicopters en toebehoren ..........
Categorieën
- Communicatie
- Meetapparatuur
- Quadrocopter
- Led verlichting
- DPP koolstof carbon
- Draad | Kabel | Pluggen
- Krimpkous
- Regelaars | ESC
- Vliegsimulators en interface
- Electronica
- Spinners | Meenemers
- Servos Hitec
- Servos Multiplex
- Gereedschap
- Electromotoren
- Motoren
- Lipo-NiMH-Pb
- Ontvangers
- Zenders
- Gyro
- Bevestigings materialen
- Bouwmaterialen
- Servo Toebehoren
- Programmers
- Propellers
- Flight Control
- Lijmen/glue
Nieuwe producten
-
1N5819 €3.95 -
ATAVRSBIN1 €69.95 -
-
UHU plus acrylit €8.95 -
Compressor 8 bar €469.00
Onze nieuwsbrief
- Home
- Ontvangers
- Multiplex
- 2,4GHz
- MPX-55807 M-LINK ontvanger
MPX-55807 M-LINK ontvanger
Consumentenprijs:
Uw prijs:
€59.95
(inclusief BTW) (U bespaart €4.95)
SKU:
55807
Productbeschrijving
| Receiver RX-6 light M-LINK 2,4 GHz (Micro) #55807 | |
|
|
RX-6 light M-LINK (Micro) 2.4 GHz receiverUltra-compact, ultra-lightweight six-channel receiver exploiting MULTIPLEX 2.4 GHz M-LINK technology: ideal for use in very small and micro-models. The RX-6 light MLINK is fitted with JST connectors, which are in widespread use for indoor models. In terms of circuit technology it is identical to the RX-5 light M-LINK, and therefore a good, reliable choice for outdoor flying with the smaller model. The plus-points: • HOLD / FAIL-SAFE function • Integral button and LED for: Binding FAIL-SAFE programming RESET Operating status information Specification: Servo channel count 6 Reception system 2.4 GHz FHSS (Frequency Hopping Spread Spectrum) Operating voltage 3.5 … 9.0 V Power supply 4 - 5 NiXX cells, 2S LiPo / LiIo Operating temperature range -20°C … +55°C Dimensions (L x W x H), excl. aerial approx. 30 x 14 x 8 mm Weight approx. 3.3 g (1.9 g excl. case) Tip! Size and weight can be reduced further: If there are only 4 channels required the outer receiver case can be removed. By cutting off the servo-plug-bench the size and weight will be reduced to approx. 25 x 13 x 7 mm / 1.7 grams. For technically experienced modellers further modifications are possible to make the rx even smaller and lighter. The receiver.pc-board can be shortened / all the serrvoplugs disconnected and and servocables soldered directly to the pc-board. A physical size of 21 x 13 x 2.5 mm with just 1.3 grams can be realized. But still all 6 channels can be used. WARNING: Any modification will invalidate manufacturers warranty!!! It should only be carried out by experienced electronic technicians. Accessories: Servo lead, 10 cm (Micro) # 8 5140 |
